Switch currency

Your Shopping Cart

WE ACCEPT

sclogo 156x83

ms accpt 034 gif mc accpt 030 gif

 amexlogo

vbv 2c

visa pos 2c electron pos 2c

wire

paypal logo-475x164 

 

 

 

 

 

Manual how to select the right variant of wheel hub cap:

- Prepare your measured values ​​of A, B, C, D and F, these values to be compared on the right side of the table
  where the  applicable ranges are


- start with comparing dimension C, that will narrow your options to one or few variants

- then continue with dimension B, that will again narrow to one or maybe to caps variants

- and as last compare dimension A.

At this point you should have only one cap in your scope. If there might still be two options
compare also dimensions  D, E and F and selct one with dimensions that fit  the best.
Write down your selection and use it for your order.


If you need advice, send us email with the dimensions you have measured.


 

Overview of variants:

 

Wheel center caps diameter 60 mm


cover blueprint

                    

Your measured dimensions can be used within bellow ranges:

In order to have the center cap fit prefectly, dimensions A, B and C measured by you must be in within all three  A, B and C ranges for particular cap variant.

Cap variant Photo - click to enlarge A

B

C D E F A B C
1010 1010 Wheel center cap 59,7 55,5 2,0 3,6 8,0 3,0 59,5 - 60,2 mm 55,3 - 55,7 mm 2,0 - 2,4 mm
1013  1013 Wheel center cap 60,1 55,3 2,2 4,0 7,0 3,5 59,8 - 60,5 mm 55,1 - 55,5 mm 2,2 - 2,6 mm
1015  1015 Wheel center cap 60,1 56,0 2,3 4,0 8,0 3,5 59,8 - 60,5 mm 55,8 - 56,2 mm 2,3 - 2,7 mm
1028 1028 Wheel center cap 59,0 54,0 2,5 4,0 5,7 7,0 58,8 - 59,5 mm 53,8 - 54,2 mm 2,5 - 2,9 mm
1035 1035 Wheel center cap 59,0 54,0 3,0 5,0 7,5 5,5 58,8 - 59,5 mm 53,8 - 54,2 mm 3,0 - 3,4 mm
1016 1016 Wheel center cap 59,0 56,0 3,0 5,0 9,5 3,6 58,8 - 59,5 mm 55,8 - 56,2 mm 3,0 - 3,4 mm
1036  1036 Wheel center cap 59,3 56,0 3,0 5,0 8,0 3,5 59,1 - 59,8 mm 55,8 - 56,2 mm 3,0 - 3,4 mm
1033  1033 Wheel center cap 59,8 55,0 3,5 6,0 9,0 3,5 59,6 - 60,3 mm 54,8 - 55,2 mm 3,5 - 3,9 mm
1011 1011 Wheel center cap 59,0 54,9 4,0 6,0 9,0 3,5 58,8 - 59,5 mm 54,7 - 55,1 mm 4,0 - 4,4 mm
1024 1024 Wheel center cap 59,0 55,1 4,0 6,0 9,5 2,6 58,8 - 59,5 mm 54,9 - 55,3 mm 4,0 - 4,4 mm
1038  1038 Wheel center cap 59,0 55,5 4,5 6,5 9,2 2,5 58,8 - 59,5 mm 55,3 - 55,7 mm 4,5 - 4,9 mm
1040 1040 Wheel center cap 58,5 53,0 5,0 7,0 11,0 4,0 58,3 - 59 mm 52,8 - 53,2 mm 5,0 - 5,4 mm
1021 1021 Wheel center cap 59,5 54,3 5,0 7,0 9,0 2,0 59,3 - 60,1 mm 54,1 - 54,5 mm 5,0 - 5,4 mm
1023 1023 Wheel center cap 59,5 55,7 5,0 6,5 9,1 3,0 59,3 - 60,1 mm 55,5 - 55,9 mm 5,0 - 5,4 mm
1006  1006 Wheel center cap 59,0 56,0 5,3 7,0 10,0 2,5 58,8 - 59,5 mm 55,8 - 56,2 mm 5,3 - 5,7 mm
1005 1005 Wheel center cap 59,0 56,0 5,5 7,8 11,5 2,8 58,8 - 59,5 mm 55,8 - 56,2 mm 5,5 - 5,9 mm
1039  1039 Wheel center cap 59,0 Typ SHAPER    2,7